Skip to product information
1 of 1

Hammer-In Landscape Edging - Cor-Ten Steel - 2ft Strips - Plus Connector Clips

Hammer-In Landscape Edging - Cor-Ten Steel - 4ft Strips - Plus Connector Clips

Regular price $19
Regular price Sale price $19
Sale Sold out
Height
Thickness
Bend Radius

Free Shipping

Free Returns

4 interest-free
installments

Made in USA

Pay in 4 interest-free installments for orders over $50.00 with Shop Pay

View full details

Premium Materials

16 gauge COR-TEN weathering steel that is durable and long lasting.

Installs In Seconds

Easy to bend and teeth that pierce into the ground.

Attractive

Beautiful now and ages to a gorgeous, protective patina.

Weed Control

Deep enough to block most grass roots and weeds.

Heavy Duty

Holds back dirt, mulch, and rock. Plus, resists trimmer or mower damage.

Please Note

The "bend" is a curve/radial angle at 90° and 45°, not a hard bend..

Hammer-In Design

INSTALLS IN SECONDS

Yes, we said seconds. With our easy hammer-in / no-dig installation, each strip takes less than a minute to install. If you can swing a hammer, you can install this edging.

One of our customers installed 64 feet in just 2 hours. That's total project time, not just the edging installation!

Improves with age

WEATHERING STEEL

Edge Right has no paint to chip off, no fading, just an ever more beautiful patina. As other products degrade with age, ours improves!

EDGE RIGHT is typically not pre-weathered, however most product will arrive with some patina already forming. The patina will continue to darken overtime as seen in the chart.

SEAMLESS, THICKER EDGE

THE ROLLED EDGE

The rolled top edge offers seamless connections between edging strips for a continuous border. Its thicker rounded design provides enhanced durability against the elements. The smooth curved finish improves safety by eliminating sharp edges.

SET AND FORGET

DESIGNED TO LOWER MAINTENANCE

Many existing edging systems on the market simply sit on top of the grass. Edge Right goes deep into the soil, helping to deter grass and weed roots. It features an EPA pest device number (Reg. No - 94763-DV-2), indicating compliance with environmental standards.

FREQUENTLY ASKED EDGING QUESTIONS

Is this product too thick to curve or bend?

It can be curved. The COR-TEN steel is a lower carbon steel making it less rigid at this gauge/thickness. This is about the thickest material you can effectively curve.

What can I use to trim the material?

Edge Right steel landscape edging can be cut to length using standard metal cutting tools.

However, for added convenience and flexibility, we now offer short filler pieces in 24, 12, 6, and 4 inch lengths. These allow you to easily achieve your desired finished length without the need for cutting or overlapping. Simply select the appropriate filler piece size to seamlessly complete your edging project.

Can I use a rubber mallet to hammer in the edging?

A rubber mallet can be used to install Edge Right. However, the mallet has a lot of bounce when striking the material. We have found the best method is to use a steel hammer with a wood bump block positioned across the spine (imagine making a "T") of the edging.

Can Edge Right be installed in rocky soil?

Rocks can impede the installation, but are typically not an issue. Large rocks may make hammering in difficult, it's best to remove them if hit during the installation. This being said, Edge Right is very durable and can be hammered through most anything given enough effort.

How can I prevent the rust patina from forming?

The metal can be sealed with a clear coat to prevent rusting. Here are some of the most popular products for achieving this:

  • Rust-Oleum Clear Ultra Cover
  • Flood Floetrol (this is actually a paint additive but works fairly well on sealing metals)
  • Everbrite
  • KBS Coatings
  • ProtectaClear Coating
  • Spraymax 2K
  • Krylon CoverMaxx

Edge Right is the ultimate grass edging that is built to last. Unlike other brands Edge Right has teeth that slice through dirt with ease when hammered into the ground. The deep barrier keeps grass from sneaking under and infiltrating your flower beds, giving you more time to enjoy your weekends!

Installation: For best results run along your installation line with an edger to provide a guide when inserting. Insert the border and pound in with a hammer. In order to avoid damage to the metal use a wood block rather than hitting the metal directly. Install as deep as you wish, most grass rhizomes stay in the top 2 inches of soil. Use caution where you install Edge Right, above ground edging can be a tripping hazard.

About Cor-Ten Steel: This product uses 100% A606-T4 weather steel, also known as COR-TEN. Cor-Ten is known for it's high tensile strength and unique weathering ability. Cor-Ten forms a protective rust coating that regenerates when continuously subject to the weather.

Sealing Edge Right to Prevent Rust: If you wish to protect the metal surface from rusting, we recommend two products. Floetrol by Owatrol, or EVERBRITE. Before applying either product, be sure to thoroughly clean and dry the surface.

  • Speed Freaks

    Everything is in stock, everything ships quickly. We wouldn't have it any other way.

  • Customer Care

    Care, because we really do. We strive to make every experience with us end in a smile.

  • Free Returns

    Don't be worried. We're not! Once you see and feel our edging, we know you won't send it back. (and we're betting on it)1

1- Returns made within 45 days are free. See full policy for extended return details.